Adjust the virtual occlusion model
If you verified the occlusion model, and are not satisfied with the result, then it can be adjusted. Either manually adjust the fragments' positions, or change the simulation.
Manually adjust the fragments' positions
On the smart panel, click the Movements tab 
and use the translation in the smart panel and rotation in the smart panel functionality.
Change the simulation
Make adjustments by modifying one or more conditions:
Increase the occlusion tension applied by the simulation model: In the left-hand sidebar, click Add springs. To remove a spring, select it in the 3D viewer and click Remove selected spring. To remove all springs at once, click Remove all springs.
Note
The simulation with springs cannot be performed when an osteotomy was simulated beforehand.
.
Change the simulation's starting point: On the smart panel, click the Movements tab and use the translation in the smart panel and rotation in the smart panel functionality.
Use the grinding functionality: On the smart panel, click the Grinding tab 
.
Click Simulate to restart the occlusion simulation.