Scheduling a Scan
Make sure you are connected to DTX Studio™ Core.
To request a scan or to initiate a scan workflow with multiple scan protocols:
Select the patient record in the patients list 
.
Click Scan request 
.
The image acquisition devices that are connected to DTX Studio™ Core, are represented by tiles, showing a picture of the device (if available) and the possible modalities.
Notes
Click 
to filter on the modality type.
Devices that are in use are marked by an hourglass.
Offline devices are grayed out.
Optionally, initiate a scan workflow with multiple scan protocols: click QuickPrescribe. Hover over an available scan workflow and click Create scan requests. Continue with step 7.
To select a device, hover over the device and click Select.
Fill out the applicable information in the scan request form.
Note
The temporomandibular joint can also be selected.
Depending on the chosen modality, the form is different.
If the image acquisition device allows multiple modalities, select the required modalities: 3D, CEPH (Cephalogram), OPG (PAN), IOXRAY (2D intraoral scan), IOS (3D intraoral scan) and/or IOCAM (intraoral photo) in the sidebar. If applicable, select an imaging program.
On the tooth chart, select the regions you want to scan.
Enter the Scan date. Enter the Requesting clinician. By default, the logged-in user is filled in automatically in this field.
Select Sinus if the sinus needs to be scanned.
Select an image acquisition resolution if applicable.
If the selected device is an intraoral device, select a Template, and specify the Imaging program.
If needed, add Request notes for the operator.
Note
Required fields are marked with a red asterisk.
If everything is fine, click Create scan request(s). To select another device, click Back.
A scan request card is added to the Scan requests tab on the patient detail panel and the scan requests list.
To initiate the scan, click Start on the scan request card.