Automatic alignment of radiographic guide and patient model

The patient model and the radiographic guide model will be aligned automatically. Three steps are automatically executed. First the patient markers are detected, next the radiographic guide markers are detected and finally the markers are aligned. The progress bar shows the progress. The alignment results are listed.

DTX Studio™ Implant automatically takes you to the Inspect Result page.

Manual alignment

To enter the Alignment wizard do one of the following:

—     Click the Manual button during the automatic alignment process.

—     Click the Alignment icon .

Next step

Inspect the result 

Previous steps

Load the DICOM data 

Check the volume of interest and isovalue 

Inspect the created model