Image Settings

The default image settings can be set in DTX Studio Home Settings or in the Clinic module Preferences. These settings are the same.

In DTX Studio Home click  Menu.

Click  Settings.

Click Image settings.

Alternatively:

In the Clinic module,  click.

Click Preferences.

Click Image settings.

Default Image Filters

From the Default image settings list, select the image type for which you want to set the default filter settings.

Note

To set custom filters for the Gamma filter, select OPG, Intraoral or Ceph in the Default image settings list. Set the Gamma filter to Manual.

Select the default filters for the selected image type and use the appearing slider to set the filter percentage.

Notes

On the sample image, the filter's effect is shown in real-time.

Click Reset to revert to the initial default values.

Click OK.

Auto-Rotation of Intraoral Images

Upon performing an immediate image capture, intraoral images are automatically rotated in the correct position. To disable this:

Select or deselect Auto-rotate intraoral X-rays in DTX Studio capture.

Click OK.

Automatically Set Level and Window Values

Upon importing or acquiring a 2D image, level and window values are automatically set. To enable or disable this feature:

In the top-right drop-down menu, select OPG/PAN, Intraoral or Ceph.

Select or deselect Auto level window.

If Auto level window is deselected, enter custom level and window values. These values will be applied to acquired and imported images.

Click OK.

Noise Level Compensation

To take into account the image noise levels when applying filters:

In the top-right drop-down menu, select Intraoral.

Select or deselect Compensate noise level.

Click OK.

Default Reslice Thickness

In the top-right drop-down menu, select the viewer type: 3D Reslices, Panoramic or Tooth.

Select the desired default reslice thickness for the selected viewer type in the drop-down menu.

If Custom is selected, any value between 0.1 and 30 mm can be used.

Default Template

To set the default templates:

In the Default Intraoral template section, select the default template for Capturing, Workspace, and Visualization.

Do the same for the Default intraoral pictures template section and the Default clinical pictures template section.