Image Settings

Where?
	DTX Studio Home		Menu >		Settings >		Image settings
	Notification area		>		Settings >		Image settings
	DTX Studio Clinic		Patient menu >		Preferences >		Image settings

The default image settings can be set in the DTX Studio Home Settings or in the Clinic Preferences. These settings are the same.

Automatically Set Level and Window Values

Upon importing or acquiring a 2D image, level and window values are automatically set. To enable or disable this feature:

In the top-right drop-down menu, select OPG/PAN, Intraoral, Ceph, or 3D ceph.

Select or deselect Auto level window.

If Auto level window is deselected, enter custom level and window values. These values will be applied to acquired and imported images.

Enhance Bony Structures

Upon generating a 3D ceph from DICOM data, bony structures can be enhanced in the generated image. To enable or disable this feature:

In the top-right drop-down menu, select 3D ceph.

Select or deselect Enhance bony structures.

Note

Changing this setting will not affect images that have already been generated. It will only apply to images created after the setting has been changed.

Compensate Noise Level

To take into account the image noise levels when applying filters:

In the top-right drop-down menu, select Intraoral.

Select or deselect Compensate noise level.

Default Reslice Thickness

In the top-right drop-down menu, select the viewer type: 3D Reslices, Panoramic or Tooth.

In the Reslice thickness drop-down menu, select the desired default value for the selected viewer type .

If Custom is selected, any value between 0.1 and 30 mm can be used.

Default Image Filters

From the Default image settings list, select the image type for which you want to set the default filter settings.

Note

To set custom filters for the Gamma filter, select OPG, Intraoral or Ceph in the Default image settings list. Set the Gamma filter to Manual.

Select the default filters for the selected image type and use the slider to set the filter percentage.

On the sample image, the filter's effect is shown in real-time.

Click Reset to revert to the initial default values.

Enable or Disable Unfiltered Images in the Capture Module

By default, images are shown with applied filters in the capture module. To show or hide filters:

In the DTX Studio Home Settings or the Clinic Preferences dialog, click Image settings.

Select or clear Show unfiltered image in DTX Studio Capture.

Auto-rotation of Intraoral Images

Upon performing an immediate image capture, intraoral images are automatically rotated in the correct position. To disable this, deselect Auto-rotate intraoral X-rays in DTX Studio capture.

Default Template

To set the default templates:

In the Default Intraoral template section, select the default template for Capturing, Workspace, and Visualization.

Do the same for the Default intraoral pictures template section and the Default clinical pictures template section.