Free Acquisition with Intraoral Sensors or PSP Devices
To acquire intraoral images without using a template:
Select the Free tab.
Go to the device to perform the scan.
Note
By default, images are automatically rotated. To disable this, go to the image settings.
On the preview page, inspect the acquired image and assign a tooth range.
 |
With MagicSort™ autodetection, teeth are automatically identified, images rotated, and placed in the correct intraoral layout placeholder when imported or in the capture wizard. If activated, see the steps below: In the bottom-right corner, the MagicSort™ icon is shown. In the capture wizard teeth are automatically detected. They are marked in blue. Click on a tooth to remove the MagicSort™ label. Intraoral images are automatically mapped on FMX charts. Manually indicate unidentified images on the tooth chart. Note By default, MagicSort™ autodetection is activated. To deactivate it, see disable autodetection. |
To show or hide the applied filters, hover over the preview image and click 
next to Image filters.
Note
By default, images are shown with applied filters. To show unfiltered images instead, go to Image Settings.
To remove the indicated teeth on the tooth range, click Clear selection.
To rotate or flip the acquired image, hover over the preview image and press one of the icons or shortcuts below:
| Action | Icon | Shortcut |
| Rotate image counterclockwise |  |
Alt +  or Shift+R |
| Rotate image clockwise |  |
Alt +  or R |
| Flip intraoral image or clinical picture horizontally |  |
U |
| Flip intraoral image or clinical picture vertically |  |
Shift+U |
When the intraoral image or clinical picture belongs to an image group (multi-shot intraoral camera pictures), rotation and flip are also applied to all the other images or pictures of that image group.
Click Finish to end the action or click Open diagnose to open DTX Studio Clinic.