To set the default image filters:
In the DTX Studio™ Clinic Settings or patient module Preferences dialog, click Image settings.
In the top-right drop-down menu, select the image type for which you want to set the default filter settings.
Select the filters to be used by default for the selected image type and use the appearing slider to set the filter percentage.
Notes
On the sample image, the effect of the filter is shown in real time.
Click Reset to revert to the initial default values.
Click OK.
Upon importing or acquiring a 2D image, level and window values are automatically set. To enable or disable this feature:
In the DTX Studio™ Clinic patient module Preferences dialog, click Image settings.
In the top-right drop-down menu, select OPG, Intraoral or Ceph.
Select or deselect Auto level window.
If Auto level window is deselected, enter custom level and window values. These values will be applied to acquired and imported images.
Click OK.
To define the default slice thickness:
In the DTX Studio™ Clinic Settings or patient module Preferences dialog, click Image settings.
In the top-right drop-down menu, select the viewer type: 3D Reslices, Panoramic or Tooth.
Select the desired default slice thickness for the selected viewer type in the drop-down menu.
If Custom is selected, any value between 0.1 and 30 mm can be used.