in the
top-right corner of the 2D viewers or right-click the reslice in the 3D
viewer.To display a reslice in X-ray mode:
1. Click Reslice Properties in the
top-right corner of the 2D viewers or right-click the reslice in the 3D
viewer.
2. Select Reslice Mode. Alternatively, open the Property Panel [Ctrl+P] or [Cmd+P] and go to the Reslice Mode tab.
3. Select X-ray to show the CT data in a volume with a certain thickness around the curve, projected on the reslice shape.
Tip
When working with the panoramic reslice you can also use the icons in the bottom-right corner of the panoramic reslice to switch between single slice mode and X-ray view.
|
To show the panoramic reslice in single slice mode, click this icon. |
|
To show the X-ray view of the panoramic reslice, click one of these X-ray view icons depending on the X-ray thickness presets to be used (small, medium or large). The thickness of the panoramic reslice is displayed in the Panoramic workspace on the cross-sectional reslice as two dotted red lines. |
