Visibility of reslices

This property indicates which of the three reslices composing the cross-sectional reslice are visible. At least one of the three reslices must be visible at all times.

Show or hide the horizontal reslice

1.       Select Visible Slices in the Shape group of the Cross-sectional tab in the toolbar.

2.     Select Horizontal Slice from the drop-down menu.

3.     To hide the horizontal reslice, clear the Horizontal Slice option.

or

1.       Right-click the cross-sectional reslice.

2.     Select Visible Slices.

3.     Choose Horizontal Slice.

4.     To hide the horizontal reslice, clear the Horizontal Slice option.

Show or hide the perpendicular reslice

1.       Select Visible Slices in the Shape group of the Cross-sectional tab in the toolbar.

2.     Select Perpendicular Slice from the drop-down menu.

3.     To hide the perpendicular reslice, clear the Perpendicular Slice option.

or

1.       Right-click the cross-sectional reslice.

2.     Select Visible Slices.

3.     Choose Perpendicular Slice.

4.     To hide the perpendicular reslice, clear the Perpendicular Slice option.

Show or hide the parallel reslice

1.       Select Visible Slices in the Shape group of the Cross-sectional tab in the toolbar.

2.     Select Parallel Slice from the drop-down menu.

3.     To hide the parallel reslice, clear Parallel Slice.

or

1.       Right-click the cross-sectional reslice.

2.     Select Visible Slices.

3.     Choose Parallel Slice.

4.     To hide the parallel reslice, clear Parallel Slice again.

Note

The visibility of reslices can also be controlled using the Visible Slices group on the Reslice tab of the Property Panel. Select or clear the appropriate check boxes.