The scan of a dental cast is based on an analog impression and represents the patient’s intraoral situation. A diagnostic setup can be created on the dental cast. The surface of this dental cast and, optionally, the diagnostic setup can be accurately scanned (digitized) with a NobelProcera 2G System by your dental laboratory. This surface scan can be imported into DTX Studio™ Implant to be aligned with the patient’s 3D model.
After making the impression, open the patient file within DTX Studio™ Implant and order a scan of the dental cast from a NobelProcera® laboratory – if there is no in-house lab available. Once the scanned file is available, you can download the scan from NobelConnect® or import it and align it with the DICOM data from the patient model.