Offset

It is possible to change the offset of the panoramic reslice. If the offset is 0 mm, it coincides with the reslice curve; otherwise the center line has an offset with respect to the reslice curve. When changing the offset, the panoramic reslice shifts perpendicular to its curve.

Note

Changing the offset is only possible when single slice mode is selected for the panoramic reslice.

1.       Ensure the reslice mode is set to Single Slice.

2.     Right-click the panoramic reslice.

3.     Select Offset and drag the slider to adjust the offset.

Alternatively:

1.       Right-click the panoramic reslice and click Property Panel or press [Ctrl+P] or [Cmd+P] on the keyboard.

2.     Set the Offset value in the box or use the slider to adjust it. To shift forward, set a positive offset. To shift backwards, enter a negative one.

1.       Default offset of the panoramic reslice

2.     A positive offset value, shifting the panoramic reslice forward

3.     A negative offset value, shifting the panoramic reslice backwards