Moving the cross-sectional reslice along the curve is only possible in curve mode. To move the cross-sectional reslice along the curve, use one of the following methods.
1. Select the cross-sectional reslice.
2. Click Slice Index on the dedicated Cross-sectional tab.
3. Drag the slider to the left or right to reposition the cross-sectional reslice on the curve.
Tip
You can also enter a slice number manually. Press [Enter] to jump to the indicated slice.
1. Right-click the cross-sectional reslice.
2. Select Slice Index from the menu.
3. Drag the slider to the left or to the right. The cross-sectional reslice will follow correspondingly along the curve.
1. Hover over the 2D viewer.
2. Scroll the mouse wheel up or down.
3. The cross-sectional reslice will follow back and forth. The images in the 2D viewer change correspondingly.
Or
1. Click the slider in the lower-right corner of the 2D viewer and hold down the mouse button.
2. Drag the slider to the left or to the right.
3. The cross-sectional reslice will follow along the curve and the images in the 2D viewer update accordingly.
Or
1. Click the Slice box in the lower-left corner of the 2D viewer.
2. Type in a slice number.
3. The cross-sectional reslice jumps to the indicated slice.