Cut / paste an implant

To move an implant by cutting it from the current location and pasting it into the new position:

1.       Do one of the following:

—     Right-click the implant and select Cut from the shortcut menu.

—     Select the implant and click Cut & Paste   on the dedicated Implant tab or on the Plan tab of the Planning toolbar. Alternatively, press [Ctrl or  Cmd + X] on the keyboard.

2.     The implant disappears.

3.     Indicate a new point to insert the implant. The cut implant appears at that position and has the same type, size and orientation as the originally selected implant.

Tip

Right-click to cancel moving an implant.