Adjust the depth of an implant

To adjust the depth of the implant:

1.       Select the implant and click Depth in the Refine group on the Implant tab.

2.     Do one of the following:

—     Use the slider to move the implant along its axis. The more you move it to the side, the faster the implant is translated along the long implant axis.

—     For more precise control while adjusting the depth of the implant, use the slider arrows to move the implant. With every click the implant moves along its axis in 0.1 mm increments.

—     Alternatively, use the keyboard shortcuts [Ctrl or Cmd + ] or [Ctrl or Cmd + ] to move the implant along its axis. Each key press will move the implant 0.5 mm.

Tip

The change depth functionality can be accessed by right-clicking the implant and selecting Depth. Alternatively, right-click the implant, select Property Panel, and go to the Implant Position group. Use the same methods as mentioned above to change the implant depth.