Cut / Paste an Implant

To move an implant by cutting it from the current location and pasting it into the new position:

Do one of the following:

Right-click the implant and select Cut from the shortcut menu.

Select the implant and click Cut & Paste on the dedicated Implant tab or on the Plan tab of the Planning toolbar. Alternatively, press [Ctrl or Cmd + X] on the keyboard.

The implant disappears.

Indicate a new point to insert the implant. The cut implant appears at that position and has the same type, size and orientation as the originally selected implant.

Tip

Right-click to cancel moving an implant.