Intraoral Scanning

Where?
	DTX Studio Home		Patients		Select patient record		Capture

3Shape TRIOS Scanner

To acquire intraoral scan data with a 3Shape TRIOS Scanner

Hover over the 3Shape intraoral scanner and click Select.

Start the scan in the 3Shape Dental Desktop application.

Note

For more information on how to integrate a 3Shape TRIOS intraoral scanner device, see the DTX Studio Core Quick Guide.

Complete the scanning process.

The image is added to the Patient data tab on the patient detail panel.

The finished scan request is marked with a check mark.

Click Open patient to start a new diagnosis in the Clinic module.

DEXIS Scanners

The scan module* allows you to use a supported DEXIS™ intraoral scanner by integrating DEXIS IS ScanFlow with DTX Studio Clinic.

Acquire Intraoral Scan Data

Hover over the intraoral scanner tile and click Select.

Follow the instructions in the scan module*.

The processed data is added to the patient record.

If DEXIS IS ScanFlow is used and multiple occlusion models were captured, in DTX Studio Clinic, right-click the upper or lower jaw in the occlusion viewer or use the viewer menu and click Occlusions to make a selection.

Reopen a Scan Case

Intraoral scan data that was locally captured can be reopened in the scan module*.

Note

This is only possible on the computer used to acquire the scan data.

To reopen the scan module* to edit the scan, trim, measure and more:

In a patient record, click the intraoral scan tile.

Click Edit in ScanFlow.

*For Windows computers only and on the computer which has been used for acquiring the intraoral scan data, where the folder with RAW scan data is available.

Resume DEXIS IS ScanFlow Scan

Intraoral scan data that was locally captured can be reopened in DEXIS™ IS ScanFlow to edit the scan, take additional scans, trim, measure and more:

In a patient record, select the intraoral scan tile of the DEXIS IS device.

Click More options … and select Resume in ScanFlow.

Enable the Advanced DEXIS IS ScanFlow Features

The DEXIS IS ScanFlow feature can be enabled in the settings. Refer to DEXIS IS Settings.